User guide

26 Part # 11313539 Rev. B
Loading BeadChips
Loading a Carrier into the iScan Reader
YoucanaccesstheiScanReadertrayusingeithertheiScanControlSoftwareortheOpen/
CloseTraybuttononthefrontoftheiScanReader.WhenloadingaBeadChipcarrier,be
suretoorientitproperlyintheiScanReadertray.
1 FromtheiScanControlSoftwareWelcomescreen,clickStarttoadvancetotheInsert
screen.TheiScanReadertrayautomaticallyopens.
YoucanalsoopentheiScanReadertraybydoingoneofthefollowing:
• ClicktheMenubutton intheupperleftcorneroftheICSscreenandselect
Scanner|OpenTray.
• PresstheOpen/CloseTraybuttononthefrontoftheiScanReader.TheOpen/
CloseTraybuttonislocatedbelowthestatusLEDsandhasanup‐arrowwitha
lineunderit.
Figure17Open/CloseTrayButton
NOTE
YoucanusetheAutoLoadertoautomatetheprocessofloading
BeadChipcarriersintotheiScanReader.Formoreinformation,seethe
AutoLoader2UserGuideortheAutoLoader2.xUserGuide,dependingon
yourAutoLoadersystem.
NOTE
IfaBeadChipcarrierisalreadyintheiScanReadertray,removethe
carrierbyliftingitstraightupandoutofthetray.