User guide

24 Part # 11313539 Rev. B
Loading BeadChips
Loading BeadChips onto a Carrier
BeadChipcarriersholdtheBeadChipsinplaceduringthescanprocess.
1 HoldtheBeadChipbythebarcodeend.
2 Placeitina slotsothatthenon‐barcodeendpressesupagainsttheraisedstop.
Figure13PlacingBeadChips
3 PlaceuptofourBeadChipsontothecarrierinthisway,eachinitsownslot.
TheBeadChipsmightnotlieperfectlyflatintheirindividualslots,buteachBeadChip
shouldfitbetweenthesidesoftheslot.
Figure14BeadChipsinCarrier–BeadChipsNotCompletelyFlat