User guide

iScan System User Guide 19
Using LIMS with the iScan System
Using LIMS with the iScan System
TheiScanControlSoftwareiscompatiblewiththefollowinglaboratoryinformation
managementsoftware(LIMS)programs:
` InfiniumLIMS
` lluminaLIMS
Enabling and Disabling LIMS
IfyouuseaLIMS,besuretoenable itforusewiththeiScanSystembeforebeginninga
scan.
1 ClicktheMenubutton intheupperleftcorneroftheICSscreenandselect
Tools|Options.
2 IntheOptionsdialogbox,clicktheLIMStab.
3 OntheLIMStab,selecttheEnableLIMScheckboxandclickOK.
Figure12ICSLIMSOptions
Adding a LIMS Server
1 ClicktheMenubutton intheupperleftcorneroftheICSscreenandselect
Tools|Options.
2 IntheOptionsdialogbox,clicktheLIMStab.
3 OntheLIMStab,clickNew.
4 SpecifythenameandportoftheLIMSservertobeaddedandclickOK.
ThenewLIMSserverisaddedtothelistintheLIMStaboftheOptionsdialogbox
andtotheLIMSdrop‐downmenuontheICSWelcomescreen.
NOTE
TodisableLIMS,cleartheEnableLIMScheckboxintheOptionsdialog
boxandclickOK.