Owner`s manual
7
8
SECTION 2 – BASIC OPERATION
Front Panel Overview
Status LED – Displays the current state of the iScan Duo
Off The unit is in standby mode
Red No signal detected
Blue The unit is processing the signal
Blinking Blue There is a problem with HDCP authentication
Green The unit detects an unsupported signal
Power Button – Toggles the iScan Duo’s power between On and Standby.
IR Window – This is where all IR commands are received by the iScan Duo. Do not obstruct this
window.
Front Panel Display (FPD) – This is where all information from the on screen display (OSD) is
duplicated to assist in the iScan Duo’s setup.
NOTE: When navigating the Menu, the Front Panel Display (FPD) always shows the current selec-
tion on the bottom line and the menu/submenu item on the top line. When you change a value of a
setting, the value is on the bottom line and the title of the parameter is on the top line.
Navigation Buttons – These buttons are available on both the front panel and the remote control.
Back Panel Overview
Video Inputs
The iScan Duo has fteen (15) video inputs. Most popular formats are supported on each input.
The formats, colorspace and bit-depth that the inputs support are as follows:
• Video 1, Video 2 and Video 3
— Formats: NTSC, PAL, PAL-M and SECAM
• S-Video
— Formats: NTSC, PAL, PAL-M and SECAM
• Component/RGBS 1 and Component/RGBS 2
— Formats: 480i/p-60, 576i/p-50, 720p-50/60, 1080i-50/60, 1080p-50/60
— Colorspace: YPbPr and RGB
— In RGBS mode, Video 1 and Video 2 inputs are used as syncs
• VGA
— Formats: VGA/SVGA/XGA/SXGA-60
— Colorspace: RGBHV
• HDMI 1– 8
— Formats: 480i/p-60, 576i/p-50, 720p-50/60, 1080i-50/60, 1080p-24/25/30/50/60,
VGA-60, SVGA-60, XGA-60, SXGA-60
— Colorspace RGB/YCbCr 4:4:4/YCbCr 4:2:2
— Bit-Depth: 8/10/12-bit processed
Video Outputs
The iScan Duo has two HDMI video outputs. The default output is HDMI 1. Select HDMI 2 output
using VIDEO output button or the on-screen menu.
The HDMI digital video output can output the following signal types:
• RGB
• YCbCr 4:2:2
• YCbCr 4:4:4
To connect the iScan Duo to a display that has a DVI input, use either an HDMI-to-DVI cable or an
adapter.
Audio Inputs
There are fourteen (14) audio inputs on the iScan Duo:
• Three (3) Optical Digital inputs
• One (1) Coaxial Digital inputs
• Two (2) Analog (L/R) inputs
• Eight (8) HDMI 1.3 inputs
While the digital and analog audio inputs can be assigned to any one of the video inputs, the HDMI
audio inputs are tied directly to the HDMI video signal connected on the same input.
The iScan Duo accepts digital audio sourced from DVD players, satellite receivers, digital set top
boxes, HD-DVD players, Blu-ray players, game consoles, and other video components with digital
audio. These inputs are compatible with most consumer digital audio formats, including CD-Audio
(44.1kHz/16 bit LPCM), Dolby Digital, and DTS. The coaxial digital audio inputs are compatible with
any format with a sampling frequency between 24kHz and 192kHz, and with a data word structure
up to 24 bits in length. The optical digital audio inputs are compatible with any format with a sam-
pling frequency between 24kHz and 96kHz and with a data word structure up to 24 bits in length.
The HDMI audio inputs are compatible with all of the HDMI 1.3 audio formats.
t ,p,q, u
MENU
EXIT
HDMI
1234
INPUT
OUTPUT
1
3
2
4
SERIAL PORT
ANALOG AUDIO INPU T
Y (G) Pb (B) Pr (R) HV
DC In
Y (G) Pb (B) Pr (R)
1
2
1
2
1
2
1
2
LR
ANALOG VIDEO
I
N
P
U
T
S
I
N
P
U
T
O
U
T
P
U
T
Front Panel Display (FPD)
Navigation Buttons
Up
Power Left Down Right
Menu
Exit
Power
Video 1
Video 2
Optical
Digital
Output
Coaxial
Digital
Output
Optical
Digital Input
1 & 2
Coaxial
Digital Input
3 & 4
Serial Port
S-Video 1
S-Video 2
Component/RGBS 2
Component/RGBS 1
RGBHV/Component
Output
HDMI Inputs
1–4
HDMI Output
Analog Audio
Input
DIGITAL AUDIOS-VIDEO VIDEOSYNCPOWER
HD-SDI Inputs (Optional)
1 & 2
RGBHV/Component
Input
IR WindowStatus LED Enter
COMPONENT
12V Triggers
1 & 2
MENU
EXIT
Front Panel Display (FPD)
Navigation Keys
Up
On/Standby Left Down Right
Menu
Exit
IR WindowStatus LED Enter
12345678
VGA
SERIAL PORT
VIDEO 3
Y (G) Pb (B) Pr (R)
VIDEO/S
12 VDC 5A
1
2
1
2
12
123
LR LR
DIGITAL AUDIO INPUTS
AUDIO OUT
TRIGGER OUTANALOG AUDIO INPUTS
12 VDC 50mA MAX
12
12
IN
OUT
S-VIDEO
AUDIO
A NALOG VIDEO INPUTS HDMI INPUTS HDMI O UTPUTS
USB POWER
IR
HDMI Inputs
1–8
HDMI Outputs
1–2
PowerRemote
Control
Jacks
Mini USB
Port
S-Video
Optical Digital
Output
Optical
1 – 3
12V Triggers
1 & 2
Analog Audio Inputs
1 & 2
Serial Port
HDMI Audio
Output
Coaxial
Video 3
Component 1
Component 2
VGA PortVideo 2
Video 1
Digital Audio Inputs
MENU
EXIT
HDMI
1234
INPUT
OUTPUT
1
3
2
4
SERIAL PORT
ANALOG AUDIO INPU T
Y (G) Pb (B) Pr (R) HV
DC In
Y (G) Pb (B) Pr (R)
1
2
1
2
1
2
1
2
LR
ANALOG VIDEO
I
N
P
U
T
S
I
N
P
U
T
O
U
T
P
U
T
Front Panel Display (FPD)
Navigation Buttons
Up
Power Left Down Right
Menu
Exit
Power
Video 1
Video 2
Optical
Digital
Output
Coaxial
Digital
Output
Optical
Digital Input
1 & 2
Coaxial
Digital Input
3 & 4
Serial Port
S-Video 1
S-Video 2
Component/RGBS 2
Component/RGBS 1
RGBHV/Component
Output
HDMI Inputs
1–4
HDMI Output
Analog Audio
Input
DIGITAL AUDIOS-VIDEO VIDEOSYNCPOWER
HD-SDI Inputs (Optional)
1 & 2
RGBHV/Component
Input
IR WindowStatus LED Enter
COMPONENT
12V Triggers
1 & 2
MENU
EXIT
Front Panel Display (FPD)
Navigation Keys
Up
On/Standby Left Down Right
Menu
Exit
IR WindowStatus LED Enter
12345678
VGA
SERIAL PORT
VIDEO 3
Y (G) Pb (B) Pr (R)
VIDEO/S
12 VDC 5A
1
2
1
2
12
123
LR LR
DIGITAL AUDIO INPUTS
AUDIO OUT
TRIGGER OUTANALOG AUDIO INPUTS
12 VDC 50mA MAX
12
12
IN
OUT
S-VIDEO
AUDIO
A NALOG VIDEO INPUTS HDMI INPUTS HDMI O UTPUTS
USB POWER
IR
HDMI Inputs
1–8
HDMI Outputs
1–2
PowerRemote
Control
Jacks
Mini USB
Port
S-Video
Optical Digital
Output
Optical
1 – 3
12V Triggers
1 & 2
Analog Audio Inputs
1 & 2
Serial Port
HDMI Audio
Output
Coaxial
Video 3
Component 1
Component 2
VGA PortVideo 2
Video 1
Digital Audio Inputs