User guide

9: Client Applications — Commands and Responses
DC 900-1338I 181
DLI_OPT_ARGS.usFWPacketType n/a
DLI_OPT_ARGS.usFWCommand n/a
DLI_OPT_ARGS.usFWStatus n/a
DLI_OPT_ARGS.usICPClientID n/a
DLI_OPT_ARGS.usICPServerID n/a
DLI_OPT_ARGS.usICPCommand DLI_ICP_CMD_READ
DLI_OPT_ARGS.iICPStatus DLI_ICP_ERR_NO_ERR
DLI_OPT_ARGS.usICPParms [0] n/a
DLI_OPT_ARGS.usICPParms [1] n/a
DLI_OPT_ARGS.usICPParms [2] n/a
DLI_OPT_ARGS.usProtCommand DLI_PROT_GET_STATISTICS_REPORT
DLI_OPT_ARGS.iProtModifier n/a
DLI_OPT_ARGS.usProtLinkID Link ICP is reporting on.
DLI_OPT_ARGS.usProtCircuitID n/a
DLI_OPT_ARGS.usProtSessionID Session ID (See attach, Section 9.2.3 on page 164)
DLI_OPT_ARGS.usProtSequence n/a
DLI_OPT_ARGS.usProtXParms [0] n/a
DLI_OPT_ARGS.usProtXParms [1] n/a
Figure 9–16: Statistics Report Response Format
typedef struct {
bit16 msg_too_long; Number of messages read from WAN
and thrown away
bit16 dcd_lost; Number of times receiver restarted
because carrier was lost
bit16 abort_rcvd; Number of times receiver restarted
because abort was received
bit16 rcv_ovrrun; Number of messages received with receiver overruns
bit16 rcv_crcerr; Number of messages received with bad CRCs
bit16 rcv_parerr; Async only. Parity errors
bit16 rcv_frmerr; Async only. Number of framing errors
bit16 xmt_undrun; Number of transmit underruns
bit16 frame_sent; Number of message buffers sent
bit16 frame_rcvd; Number of message buffers received
} SPS_STATS_REPORT;
Figure 9–17: Statistics Report “C” Structure