User guide

14 DC 900-1338I

Protocol Software Toolkit Programmer Guide

• a client computer that runs the following:

• TCP/IP (for a Freeway server)

• Freeway data link interface (DLI) or embedded DLITE interface

• An ICP2424, ICP2432, or ICP6000 installed in the Freeway server’s backplane or

embedded in your client computer system

• A console cable and an ASCII terminal or terminal emulator (running at 9600

b/s) for access to the ICP console port

• A programmer’s module for the ICP2432 or ICP6000

• A set of software development tools for the Motorola 68xxx processor

• If you plan to use the sample protocol software (SPS) test program as a basis for

your client application code, you will need a C compiler for your client system

Organization of Document

Chapter1 is an overview of the Freeway server and embedded products and the proto-

col software toolkit.

Chapter2 describes the issues involved in ICP software development, including soft-

ware-development tools, the various interfaces, and how to program the hardware

devices.

Chapter3 describes local memory address allocation on the ICPs.

Chapter4 describes system download, configuration, and initialization.