User`s guide

96 DC 900-1406E
BSCTRAN Programmer’s Guide
a
Refer to the SET /START command in Section 2.4 on page 31.
b
If this error occurs during SEND or RECEIVE and the DEFAULT /ABORT option is set, BSCFTI will abort by calling
LIB$STOP.
c
RCUNR is treated as a non-fatal error and is handled by the BSCFTI procedures so that the SEND or RECEIVE opera-
tion can continue to normal completion.
d
For errors during file accesses, two VMS error messages (RMS error code and VMS system error code) are logged to
SYS$OUTPUT and applicable log files.
RCQ_WWR 8192 BSCFWY/icpwwr error Write buffer size > ICP buffersize
RCQ_CAN 81A2 BSCFWY/icpcanqio/icpcnq
error
VMS SYS$CANCEL or SYS$DASSGN error
RCQ_RDTO 81B2 BSCFWY/icprdtimo error Read buffer size too small
RCAUTODIAL
b
8162 ICP BE_AUTODIAL error Refer to Table 5–3 on page 98
RCEOT
b
81C2 ICP BE_EOT_ABORT error Refer to Table 5–3 on page 98
RCXRETRY
b
81D2 ICP BE_XRETRY error Refer to Table 5–3 on page 98
RCNOBUFS
b
81E2 ICP BE_NOBUFS error Refer to Table 5–3 on page 98
RCDCDTO
b
81F2 ICP BE_DCD_TO error Refer to Table 5–3 on page 98
RCRVI
b
8202 ICP BE_RVI_ABORT error Refer to Table 5–3 on page 98
RCDLEEOT
b
8212 ICP SFC_DLEEOT subfn code The ICP received a DLEEOT
Table 5–2: Error Return Codes Used by BSC File Transfer Program (Cont’d)
(defined in the BSCTRAN.INC include file)
Mnemonic
Value
(hex) Meaning Probable Cause