User`s guide

2: BSCTRAN Commands and Options

DC 900-1406E 29

See the BSC Programmer’s Guide for a complete description of ICP link conﬁguration

parameters.

The

SHOW command options are as follows:

/DEFAULT This option displays the current values of the

DEFAULT com-

mand options. Because these are global options, no

link# or

server parameter is required for this command. The following

is the output from the

SHOW /DEFAULT command upon startup

of the BSCTRAN program:

BSC> SHOW /DEFAULT

BSCTRAN Write Buffer Size = 1024

Default Receive Filename = DEFAULT.DAT /RECL=254

PRINT Received Files = DISABLED

BATCH Received Files = DISABLED

LOGGING of Errors/Stats = DISABLED

DISK LOGGING Errors/Stats = DISABLED

DELETE Partial Recv Files = DISABLED

SAFE STORE on Receive = DISABLED

ABORT after Fatal Errors = DISABLED

RECORD Handling = 3780 (RS)

Note

The “PRINT Received Files,” “BATCH Received Files,” and

“LOGGING of Errors/Stats” do not apply to the UNIX display.

/STATS

This option displays the current values of an ICP Link Statistics

Report.

/CLEAR This option displays the current values of an ICP Link Statistics

Report, then sets all link statistics to zero. The

/CLEAR option

must be used with the

/STATS option. The following are out-

puts for the

/STATS and /CLEAR options of the SHOW command: