User`s guide

28 DC 900-1406E

BSCTRAN Programmer’s Guide

2.3 SHOW Command

The SHOW command has the following format:

SHOW link# server[_ICP#] [/DEFAULT] [/STATS] [/CLEAR]

The SHOW command displays the current conﬁguration of the link (link#) on the server

pointed to by the

server parameter. It is important that you read Section 2.1 on page 20

to understand the

parameter. Table 2–1 is an example of the SHOW command out-

put indicating the default BSC link conﬁgurations immediately after downloading the

BSC software to the ICP.

Table 2–1: SHOW Command Output

Link Conﬁguration

Local Link 0 Status = INACTIVE

ICP Buffer Size = 1024 104 buffers free out of 104

Par

# Description Value

Par

# Description Value

1 Data rate 9 (9600) 2 Clock source 0 (external)

3 Reply timer length 3 4 Number syncs 3

5 Protocol 0 (3780) 6 Parity 1 (odd)

7 Character set 1 (EBCDIC) 8 Transmit block size 512

9 Record separator 0 (none) 10 Data translation 1 (Table 1)

11 Station priority 0 (slave) 12 Space compression 0 (disabled)

13 Conversation mode 0 (disabled) 14 Retry limit 3

16 Modem control 1 (full duplex) 17 Safe store 0 (disabled)

19 Message blocking 1 (data) 20 Block checking 1 (exclude ﬁrst)

22 EOM line control 0 (reverse) 22 Data Ack node 0 (disabled)

24 Alternating Ack 1 (enabled) 26 TTD/WACK 1 (enabled)

28 RVI handling 0 (continue) 30 DSR delay 3

35 Modem type 1 (SADL)