User`s guide

DC 900-1406E 19
Chapter
2
BSCTRAN Commands
and Options
Note
In this document, the term “Freeway” can mean either a Freeway
server or an embedded ICP. For the embedded ICP, also refer to
the user’s guide for your ICP and operating system (for example,
the ICP2432 User’s Guide for OpenVMS Alpha (DLITE Interface)).
The BSCTRAN program accepts command strings interactively from a terminal or in
batch mode by means of a DCL command procedure. BSCTRAN is invoked at the
user’s terminal by the following DCL command:
RUN BSCTRAN
The following prompt is then presented to the user:
BSC>
The following commands are available:
HELP
Display BSC commands and options.
SHOW
Display the current configuration of a BSC link.
SET
Establish the configuration of a BSC link.
DEFAULT
Enable or disable global options.
DIAL
Perform modem autodial and/or configuration.
SEND
Send a file to a remote BSC station.