User`s guide

DC 900-1406E 103
Chapter
7
Example BSCTRAN Usage
Note
In this document, the term “Freeway” can mean either a Freeway
server or an embedded ICP. For the embedded ICP, also refer to
the user’s guide for your ICP and operating system (for example,
the ICP2432 User’s Guide for OpenVMS Alpha (DLITE Interface)).
This chapter shows an example of how BSCTRAN is used. The BSCTRAN program
requires that you use the supplied DLI and TSI configuration files which are named
dlitrancfg and tsitrancfg respectively. If you modify these files, you must regenerate
their binary versions (
dlitrancfg.bin and tsitrancfg.bin). Do not change the names
of these files. For more information on
dlitrancfg and tsitrancfg, refer to Section 2.1
on page 20. For more information about DLI and TSI configuration files in general, see
the Freeway Data Link Interface Reference Guide and the Freeway Transport Subsystem
Interface Reference Guide. For the embedded ICP, also refer to the user’s guide for your
ICP and operating system (for example, the ICP2432 User’s Guide for OpenVMS Alpha
(DLITE Interface)).