User`s guide

88 DC 900-1343D
DDCMP Programmer’s Guide
C.17 status-rpt-ack-packet
Packet Description
This packet is received in response to a “status-rpt-ack-packet”.
Packet Header
Freeway (DLI only):
usFWPacketType = FW_DATA
usFWCommand = FW_ICP_READ
usFWStatus = 0
ICP:
usICPClientID = 0
usICPServerID = 0
[usLength = 40 (used for non-DLI only)]
usICPCommand = DLI_ICP_CMD_READ
iICPStatus = 0
usICPParams[0] = 0
usICPParams[1] = 0
usICPParams[2] = 0
Protocol:
usProtCommand = DLI_PROT_GET_STATUS_REPORT
iProtModifier = 0
usProtLinkID = port number
usProtCircuitID = 0
usProtSessionID = 0
usProtSequence = 0
usProtXParms[0] = 0
usProtXParms[1] = 0
Note
The Freeway header is used only with DLI (it is not applicable for
DLITE), and the
usLength field of the ICP header is used only
without DLI.
Data
The Link Status Report format is shown in Figure C–5.