User`s guide

C: Packet Exchange Quick Reference
DC 900-1343D 81
C.12 buf-report-packet
Packet Description
This packet is used to request a buffer report.
Packet Header
Freeway (DLI only):
usFWPacketType = FW_DATA
usFWCommand = FW_ICP_WRITE
usFWStatus = 0
ICP:
usICPClientID = 0
usICPServerID = 0
[usLength = 16 (used for non-DLI only)]
usICPCommand = DLI_ICP_CMD_WRITE
iICPStatus = 0
usICPParams[0] = 0
usICPParams[1] = 0
usICPParams[2] = 0
Protocol:
usProtCommand = DLI_PROT_GET_BUF_REPORT
iProtModifier = 0
usProtLinkID = port number
usProtCircuitID = 0
usProtSessionID = protocol session number from “attach-packet”
usProtSequence = 0
usProtXParms[0] = 0
usProtXParms[1] = 0
Note
The Freeway header is used only with DLI (it is not applicable for
DLITE), and the
usLength field of the ICP header is used only
without DLI.
Data
None
Packet Exchanges
usProtCommand sent usProtCommand received
------------------ ----------------------
DLI_PROT_GET_BUF_REPORT DLI_PROT_GET_BUF_REPORT
(see “buf-report-ack-packet” Section C.13)