User`s guide

62 DC 900-1343D

DDCMP Programmer’s Guide

The DLI and TSI conﬁguration ﬁles provided with the product are listed in Table B–1.

The DLI and TSI conﬁguration procedures are summarized as follows. Keep in mind

that TSI conﬁguration does not apply to an embedded ICP environment.

1. For a Freeway server, create or modify a TSI text conﬁguration ﬁle specifying the

conﬁguration of the TSI connections (for example,

ddcmpaltcfg in the

freeway/client/test/ddcmp directory).

2. Create or modify a DLI text conﬁguration ﬁle specifying the DLI session conﬁgu-

ration for all ICPs and serial communication links in your system (for example,

ddcmpaldcfg in the freeway/client/test/ddcmp directory).

3. If you have a UNIX or Windows NT system, skip this step. If you have a VMS sys-

tem, run the

makefc.com command ﬁle from the [FREEWAY.CLIENT.TEST.DDCMP]

directory to create the foreign commands used for dlicfg and tsicfg.

@MAKEFC <tcp-sys>

where <tcp-sys> is your TCP/IP package:

MULTINET (for a Multinet system)

TCPWARE (for TCPware system)

UCX (for a UCX system)

VMS example:

@MAKEFC UCX

4. For a Freeway server, go to the freeway/client/test/ddcmp directory and execute

tsicfg with the text ﬁle from Step 1 as input. This creates the TSI binary conﬁg-

Table B–1: Conﬁguration File Names

Freeway Server Embedded ICP

DLI: ddcmpaldcfg ddcacfg

ddcscfg

TSI: ddcmpaltcfg TSI not applicable