User`s guide

DC 900-1343D 61
Appendix
B
DLI and TSI
Configuration Process
Note
In this document, the term “Freeway” can mean either a Freeway
server or an embedded ICP. For the embedded ICP, also refer to
the user’s guide for your ICP and operating system (for example,
the ICP2432 User’s Guide for Windows NT).
This chapter summarizes the process for configuring DLI sessions and TSI connections.
DLI and TSI text configuration files are used as input to the
dlicfg and tsicfg prepro-
cessor programs to produce binary configuration files which are used by the
dlInit and
dlOpen functions. For embedded ICPs, only a DLI configuration file is used (not a TSI
configuration file).
During your client application development and testing, you might need to perform
DLI configuration repeatedly (as well as TSI configuration for a Freeway server).
Note
Some of the specifics regarding DDCMP DLI session configura-
tion were described earlier in Section 2.2.2 on page 29.
You should be familiar with the protocol-independent configuration procedures
described in the Freeway Data Link Interface Reference Guide and the Freeway Transport
Subsystem Interface Reference Guide.