User guide

2: Software Installation
DC 900-1333P 95
Caution
With the example server-resident application (SRA) software spec-
ified in the boot configuration file, the loopback test runs auto-
matically when Freeway is booted. A three-headed loopback cable
must be installed between links 0 and 1 of ICP 0 and a synchro-
nous modem before booting Freeway. The loopback test opens the
DLI sessions and enables the two links, then transfers data on both
links. The test continues for 60 seconds, then the number of mes-
sages sent and received on each link are printed on the Freeway
console. (Other Freeway log messages can appear before, after, or
intermingled with these statistics.) Links are then disabled and the
sessions are closed. Press return until you see the Login prompt.
After a successful system boot, the following login prompt appears at the Freeway local
console:
Freeway User Login:
At this point you can log in to Freeway from the local console with the default Freeway
user name (
simpact) and password (password):
Freeway User Login: simpact
Password:
password
You can also rlogin (or telnet) to Freeway from the boot server or any other computer
on the network; for example:
rlogin freeway1 telnet freeway1
Freeway User Login:
simpact Freeway User Login: simpact
Password:
password Password: password
The password is not actually displayed on the screen.