User guide

94 DC 900-1333P
Freeway User Guide
2.6 Boot Freeway
It is assumed that you have configured the Freeway boot parameters as described in the
appropriate Freeway hardware installation guide. Return to the local console next to the
Freeway unit and select option 1 at the Freeway Boot System Main Menu (shown in
Figure 2–5) to start the boot process. See Section 4.3.1 on page 122 for boot process
details.
Note
The Freeway 1100/1150/1200/1300 server can be booted the first
time using a local console or by using the boot parameters initial-
ization disk. The Freeway 2000/4000/8800 must be booted the first
time from a local console to activate the Interactive Menu. After
the initial system boot, you can telnet or rlogin to Freeway from
the boot server (or from any other computer on the network) and
use the Freeway Interactive Menu for any of the Freeway opera-
tions described in the Chapter 4.
Figure 2–5: Sample Freeway Boot System Main Menu
VI-100-0345: FWBOT 2.8-5 Jan 29 1999 Freeway Boot System
Main Menu
---------
1) System Boot
2) Display Boot Parameters
3) Edit Boot Parameters
Select: