User guide

2: Software Installation
DC 900-1333P 91
A client TSI configuration file might reference the
server parameter more than once, and
must be changed at each occurrence.
Note
If the server name and Internet address have not already been
added to the
hosts file during hardware installation, refer to your
system manual for the location of the
hosts file and add the appro-
priate information.
Note
There is a separate server TSI configuration file, usually called
muxcfg, which does not require modification for most sites.
Step 2: Edit the DLI configuration files (Freeway 1100/1150/1200/1300) in
free-
way\client\test\ppp
If you are installing a protocol on Freeway 2000/4000/8800, skip to Step 3.
If you are installing DDCMP, protocol toolkit, or X.25 on Freeway 1100/1150/
1200/1300, skip to Step 3. The electrical interface for DDCMP and protocol toolkit is
Table 2–7: Client TSI Configuration Files (Windows NT)
AUTODIN AWS BSC3270 BSC2780/3780
autodinaltcfg awsaltcfg bsc3270altcfg bsc3780altcfg
DDCMP FMP ADCCP NRM Protocol Toolkit
ddcmpaltcfg fmpaltcfg nrmaltcfg spsaltcfg
STD1200B
Military/Government
Protocol X.25/HDLC
s12altcfg miltcfg apitcfg