User guide

2: Software Installation
DC 900-1333P 71
2.3.6 Build the QIO/SQIO API Library File
If you have purchased the QIO/SQIO API, you must build the library file needed by the
Freeway software. A make command is included that performs this operation.
From the
FREEWAY.LIB.QAPI directory, enter one of the following commands. The
newly created file will be placed in the
FREEWAY.CLIENT.OP-SYS.LIB directory.
SET DEF SYS$SYSDEVICE[FREEWAY.LIB.QAPI]
@MAKEVMS "" MULTINET
(for VMS with Multinet)
@MAKEVMS "" TCPWARE (for VMS with TCPware)
@MAKEVMS "" UCX (for VMS with UCX)
2.3.7 Build the Loopback Tests
You must build the loopback tests supplied with the Freeway software. A command file
called
MAKEVMS.COM is included that performs these operations.
Step 1: Edit the client TSI configuration files in
FREEWAY.CLIENT.TEST.ppp
Edit each of the client transport subsystem interface (TSI) configuration files listed in
Ta bl e 2 –5, changing the default value of the Freeway
server parameter, freeway_0, to the
name (or Internet address) of your current Freeway server.
A client TSI configuration file might reference the
server parameter more than once,
and must be changed at each occurrence.
Note
If the server name and Internet address have not already been
defined during hardware installation, refer to Section 2.1.3 on
page 34.