User guide

68 DC 900-1333P
Freeway User Guide
Step 2: Edit the load file (pppLOAD)
Freeway server release G (and later) installs the XIO image files in the
FREEWAY.BOOT
directory. Prior to June 1, 1998, the XIO image files were distributed in the FREEWAY.
ICPCODE.ICPXXXX.OSIMPACT
directory. As a result, the load files provided with pro-
tocols with a release date prior to June 1, 1998 contain a fully qualified path for the pro-
tocol and XIO image files. Such files should be modified to remove the path to the XIO
image. This allows the Freeway to boot the local copy of the XIO image provided in the
BOOT directory with the current Freeway server release.
Edit the load file (
[FREEWAY.BOOT]pppLOAD) for your protocol or toolkit as follows:
1. Uncomment the lines associated with the type of ICP in your Freeway.
2. Modify path names as needed. If no path name is provided, Freeway searches the
System Boot Directory specified in the Freeway System Boot Parameters menu
(Figure4–27 on page149) for the file to be loaded.
3. Do not change the memory locations (such as
40001200) for the LOAD com-
mands.
For example, to modify the
BSCLOAD file to load the BSC protocol on an ICP2432,
uncomment the lines associated with the ICP2432 as shown in Figure 2–3.