User guide

2: Software Installation

DC 900-1333P 67

Edit the boot configuration file (

[FREEWAY.BOOT]BOOTCFG.xxx

) as follows:

1. Uncomment the physical parameters associated with each ICP in your Freeway.

2. For all Freeways, modify the

slave_address entry of each ICP to match your config-

uration. For Freeway 1150/1200/1300, also modify the

bus_number entry of each

ICP. Appropriate slave addresses (and bus numbers where applicable) are shown

in a table at the beginning of the boot configuration file.

3. Modify the name of the load file in each

download_script entry to match your pro-

tocol or toolkit (for example,

X25LOAD or AWSLOAD).

4. If you have moved the load file from the

BOOT directory, enter the path name for

the load file in each

download_script entry. If no path name is provided in the

download_script entry, Freeway searches the System Boot Directory specified in the

Freeway System Boot Parameters menu (Figure 4–27 on page 149) for the load

file indicated.

1. Freeway 1100 uses BOOTCFG.ISA (ICP2424) or BOOTCFG.PCI (ICP2432). Freeway

1150/1200/1300 uses

BOOTCFG.PCI. Freeway 2000/4000/8800 uses BOOTCFG.VME. Any Freeway using

ICP_IP virtual ICP devices may use

BOOTCFG.IP.