User guide

2: Software Installation
DC 900-1333P 65
Remember that
ddcu means a device name. Press <return> to answer yes (this is highly
recommended). If you answer
no, you are prompted to enter the name of a directory.
Step 12: The computer displays:
There are no more questions. The installation will proceed.
The procedure completes automatically without the need for you to take any action.
Depending on the speed of your system, this will take several minutes.
While moving the files to the appropriate directory, the computer displays the
README
file that includes configuration information such as the part, version, and serial num-
bers for the distribution, then it displays:
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of Product Vnnnn completed at current time.
Step 13: The computer displays:
Enter the products to be processed from the next distribution volume set.
* Products:
If you will be installing another protocol, enter an asterisk (*) to continue. When there
are no other distribution sets, enter
exit. The computer displays:
VMSINSTAL procedure done at current time.
The Freeway software is now installed onto your computer’s disk.