User guide

2: Software Installation

DC 900-1333P 59

• XIO_2424.MEM XIO_2432.MEM, or XIO_6000.MEM

are the executable objects

for the system-services module

Various files specific to the server-resident application (SRA), such as

buffer.size, ftst,

and the

sra files, are also in the FREEWAY.BOOT directory; however, SRA is not avail-

able on VMS.

The data link interface (DLI) and transport subsystem interface (TSI) software is in the

FREEWAY.LIB directory.

2.3.1.2 Protocol or Protocol Toolkit Software

The protocol or protocol toolkit distribution media is labeled Freeway [Name] Soft-

ware.

Note

The ppp variable mentioned below specifies the particular protocol

or toolkit you are using (refer to Ta bl e 2 –2 on page31).

The following files are in the

FREEWAY directory:

• README.ppp provides general information about the protocol or protocol toolkit

software

• RELNOTES.ppp provides specific information about the current release of the

protocol or protocol toolkit software

The load file,

pppLOAD, is in the FREEWAY.BOOT directory.

1. The Freeway server release G (and later) installs the XIO image files in the FREEWAY.BOOT direc-

tory. Prior to June 1, 1998, the XIO image files were distributed in the

FREEWAY.ICP-

CODE.ICPXXXX.OSIMPACT

directory. As a result, the load files provided with protocols with a release date

prior to June 1, 1998 contain a fully qualified path for the protocol and XIO image files. Such files should

be modified to remove the path to the XIO image. This allows Freeway to boot the local copy of the XIO

image provided in the

FREEWAY.BOOT directory with the current Freeway server release.