User guide

2: Software Installation
DC 900-1333P 57
2.3 Install the Freeway Software onto a VMS Computer
This section describes how to install the Freeway software from the distribution media
onto a VMS computer. Later in these procedures you will use this computer as a boot
server to boot Freeway.
Note
After you have followed the detailed software installation proce-
dures outlined in this chapter, you can refer to the “Installation at
a Glance” summary in Appendix A as a quick reference for future
installations.
2.3.1 Contents of the VMS Distribution Media
The Freeway software for VMS computers is distributed on a TK50/TK70 cartridge in
Files-11 format.
2.3.1.1 Server/Client Software
The server/client distribution media is labeled Freeway Server Software.
The following files are in the
FREEWAY directory:
• README.SER provides general information about the server software
• RELNOTES.SER provides specific information about the current release of the
server software
• The ENV and MAKE files are for the example server-resident application, which is
not available on VMS
2/3/99 Ginni: I
added CD
installation to
unix and nt
sections, but
not here.