User guide

52 DC 900-1333P
Freeway User Guide
2.2.7 Compile the Server Toolkit
To build a customized Freeway image using the optional Server Toolkit product, you
must have purchased and installed Tornado from Wind River Systems with the appro-
priate Board Support Package (BSP) for your Freeway. The pc486 BSP is required for
Freeway 1100/1150/1200/1300, the mv162 BSP is required for a Freeway
2000/4000/8800 with an MVME 162 CPU, and the mv2604 BSP is required for a
Freeway 2000/4000/8800 with an MVME 2600 CPU. Your Tornado installation must
match the version of Tornado used by Protogate to build the Freeway server product.
See the Server Toolkit release notes for the current version of Tornado required for
building the Toolkit.
Caution
When building the Server Toolkit, the Freeway and VxWorks
images in the
freeway/boot directory are overwritten. Before exe-
cuting the make instructions for the Server Toolkit, be sure to
archive the original copies of these files that were delivered with the
Freeway and Server Toolkit distributions so they can be easily
restored.
Compile the Server Toolkit using the provided make files.
Step 1: Edit
freeway/envcom. If you installed the server toolkit software in a directory
other than
/usr/local, modify the path assigned to FWBASE in the freeway/envcom file.
Step 2: Edit
freeway/[env486, env68k, or envppc]. If you installed Tornado in a direc-
tory other than
/usr/wind, modify the path assigned to WIND_BASE in the free-
way/env486
file (Freeway 1100/1150/1200/1300), freeway/env68k file (Freeway
2000/4000/8800 with an MVME 162 CPU) or
freeway/envppc file (Freeway
2000/4000/8800 with an MVME 2600 CPU).