User guide

2: Software Installation
DC 900-1333P 43
Source code for the OS/Impact delivered with the protocol toolkit is in the
freeway/ icp-
code/os_sds
directory.
2.2.2 Retrieve Files from the UNIX Distribution Media
Use the following procedure to install the Freeway software from the distribution media
onto your UNIX computer.
Caution
Remember that installing new software overwrites the previous
software.
Step 1: On the boot server (previously configured as described in Section 2.1), log in
to a root or other privileged account.
Step 2: Change to the default directory called
/usr/local. The installation procedure is
designed to use this default directory and the directory structure under it.
Note
It is highly recommended that you use the default directory structure.
If you install the software in a non-default directory, you must later
modify certain files as described in Section 2.5.
Note
If you are also installing the Wind River Systems’ Tornado software
required by the example server-resident application and the Server
Toolkit, we recommend that you install it in the default
/usr/wind
directory. See the VxWorks Programmer’s Guide for further infor-
mation. If you install the Tornado software in a non-default direc-
tory, you must later modify certain files as described in Step 2 of
Section 2.2.6 on page 50.
Do we still
want sentence
beginning “If
you install the
VxWorks...”?
If so do we
want a note
like this in
Windows NT
section?
06/11/98: Ron
says sentence
belongs here,
but NT
doesn’t have to
be modified.