User guide

2: Software Installation
DC 900-1333P 37
2.2 Install the Freeway Software onto a UNIX Computer
This section describes how to install the Freeway software from the distribution media
onto a UNIX computer. Later in these procedures you will use this computer as a boot
server to boot Freeway.
Note
After you have followed the detailed software installation proce-
dures outlined in this chapter, you can refer to the “Installation at
a Glance” summary in Appendix A as a quick reference for future
installations.
2.2.1 Contents of the UNIX Distribution Media
Freeway software for UNIX computers is distributed on the following types of media in
tar or cpio format. The label on the media identifies the format used.
• Quarter-inch cartridge
• Quarter-inch datastream
• TK50 cartridge
• 4mm tape
• 8mm tape
• CD-ROM