User guide

208 DC 900-1333P
Freeway User Guide
A.3 Windows NT Installations
Step 1: Install the Freeway software Chapter 2
Note
Remember that the ppp variable indicates the particular protocol
or toolkit you are using (refer to Tab le 2–2 on page 31).
a. Log in to a privileged account. page 81
b. Insert the diskette in the appropriate drive. page 81
c. Copy the software onto your computer. page 81
Step 2: Edit the boot configuration file (
bootcfg.xxx
1
) page 82
cd C:\freeway\boot
For a Freeway 1100 with both ICP2424 and ICP2432 boards installed, merge the
bootcfg.isa and bootcfg.pci files to form a new configuration file.
a. Uncomment the physical parameters associated with each ICP in your
Freeway.
b. For Freeway 2000/4000/8800, modify the
slave_address entry of each ICP to
match your configuration.
c. Modify the name of the load file in each
download_script entry.
d. If you have moved the load file from the
boot directory, enter the path name
for the load file in each
download_script entry.
1. Freeway 1100 uses bootcfg.isa (ICP2424) or bootcfg.pci (ICP2432). Freeway 1150/1200/1300 uses
bootcfg.pci. Freeway 2000/4000/8800 uses bootcfg.vme. Any Freeway using ICP_IP virtual ICP devices may
use
bootcfg.ip.