User guide

A: Installation at a Glance
DC 900-1333P 201
e. Run the make file:
cd /usr/local/freeway
For a Freeway 1100/1150/1200/1300:
/usr/wind/host/sun4-sunos4/bin/make -f MakeSRA.I486 clean all
For a Freeway 2000/4000/8800 with an MVME 162 CPU:
/usr/wind/host/sun4-sunos4/bin/make -f MakeSRA.68K clean all
For a Freeway 2000/4000/8800 with an MVME 2600 CPU:
/usr/wind/host/sun4-sunos4/bin/make -f MakeSRA.ppc clean all
This compiles all the necessary source code and links the object files to form
the SRA object module, which is then placed in the
freeway/boot directory.
f. Because the example SRA runs the loopback test automatically when
Freeway is booted, install a three-headed loopback cable between links 0
and 1 of ICP 0 and a synchronous modem before continuing to Step 9 on
page 203.
Step 7: Compile the Server Toolkit page 52
To build a customized Freeway image using the optional Server Toolkit product, you
must have purchased and installed Tornado from Wind River Systems with the appro-
priate Board Support Package for your Freeway.
a. Edit
freeway/envcom. If you installed the server toolkit software in a direc-
tory other than
/usr/local, modify the path assigned to FWBASE in the free-
way/envcom
file.
b. Edit
freeway/[env486, env68k, or envppc]. If you installed Tornado in a direc-
tory other than
/usr/wind, modify the path assigned to WIND_BASE in the
freeway/env486 file (Freeway 1100/1150/1200/1300), freeway/env68k file