User guide

A: Installation at a Glance

DC 900-1333P 199

d. Modify the name of the load file in each

download_script entry.

e. If you have moved the load file from the

boot directory, enter the path name

for the load file in each

download_script entry.

f. If you will be using the SRA, uncomment the lines

sra_module = sraxxx.o

and

sra_entry = sraInit to load and run the example SRA software at boot time.

Also modify the

tsi_config_file parameter to use the muxcfg.sra file.

g. For ICP_IP virtual devices, modify the

bootcfg.ip file to reflect your network

configuration as described in Section 3.2.1 on page 108.

Step 3: Edit the load file (

pppload) page 47

a. Uncomment the lines associated with the type of ICP in your Freeway.

b. Modify path names as needed.

c. Do not change the memory locations (such as

40001200) for the LOAD

commands.

Step 4: Build the DLI and TSI files page 48

a. If necessary, create the

op-sys directory: dec, hpux, sgi, solaris, or sunos:

cd /usr/local/freeway/client

mkdir op-sys

b. From your op-sys directory, create the bin and lib directories:

cd op-sys

mkdir bin

mkdir lib

1. xxx = 486 for a Freeway1100/1150/1200/1300, 68K for a Freeway 2000/4000/8800 with an MVME

162 CPU, or

ppc for a Freeway 2000/4000/8800 with an MVME 2600 CPU.