User guide

198 DC 900-1333P

Freeway User Guide

A.1 UNIX Installations

Step 1: Install the Freeway software Chapter 2

Note

Remember that the ppp variable indicates the particular protocol

or toolkit you are using (refer to Tab le 2–2 on page 31).

a. Log in to a root or other privileged account. page 43

cd /usr/local page 43

c. Insert the distribution media into the appropriate drive. page 44

d. Copy the software onto your computer. page 45

Step 2: Edit the boot configuration file (

bootcfg.xxx

) page 46

cd /usr/local/freeway/boot

For a Freeway 1100 with both ICP2424 and ICP2432 boards installed, merge the

bootcfg.isa and bootcfg.pci files to form a new configuration file.

a. Uncomment the physical parameters associated with each ICP in your

Freeway.

b. For all Freeways, modify the

slave_address entry of each ICP to match your

configuration.

c. For Freeway 1100/1150/1200/1300, modify the

bus_number entry of each

ICP to match your configuration.

1. Freeway 1100 uses bootcfg.isa (ICP2424) or bootcfg.pci (ICP2432). Freeway 1150/1200/1300 uses

bootcfg.pci. Freeway 2000/4000/8800 uses bootcfg.vme. Any Freeway using ICP_IP virtual ICP devices may

use

bootcfg.ip.