User guide

4: Operations
DC 900-1333P 171
on page148 describes how to modify the boot parameters. Any changes made to these
parameters are stored in Freeway’s non-volatile memory. Tabl e 4–1 on page150
describes each parameter.
Figure 4–41 shows the System Boot Parameters screen modified for booting from the
boot server.
Figure 4–41: Boot Parameters Modified to Boot from Boot Server
Freeway System Boot Parameters
------------------------------
Enter '.' to erase parameter
Enter '<RETURN>' for no parameter change
Boot Device : elt,2
Processor Number : 0
FTP User Name : freeway
FTP Password : password
Flags : 0
Freeway Server Name : freeway1
Freeway Inet Address : 192.168.45.6
Freeway Subnet Mask : 0xffff0000
Boot Server Name : bootmaster
Boot Server Inet Address : 192.168.45.1
System Boot Directory : /usr/local/freeway/boot
System Boot File Name : fw486
Configuration File Name : bootcfg.pci
Secondary Net Interface :
Gateway Inet Address :
Save modifications?
Enter 'yes <RETURN>' to save modifications
Enter 'no <RETURN>' to prevent modifications: