User guide

170 DC 900-1333P
Freeway User Guide
• Freeway 2000/4000/8800: freeway/icpcode/icp6000/protocols/x25_fw_
6000.mem
• the system boot file:
• Freeway 1100/1150/1200/1300: freeway/boot/fw486
• Freeway 2000/4000/8800 with an MVME 162 CPU: freeway/boot/fw162
• Freeway 2000/4000/8800 with an MVME 2600 CPU: freeway/boot/ fw2604
Step 1: Modify File Names to Meet MS-DOS Conventions (Freeway
1100/1150/1200/1300)
Because the Freeway 1100/1150/1200/1300 file name for the executable object for the
protocol software
(x25_fw_2424.mem or x25_fw_2432.mem) does not meet the MS-DOS
file naming conventions, it must be modified. For example,
x25_fw_2424.mem could be
modified to
x25_2424.mem. After changing the name of the x25_fw_2424.mem file, you
must edit the download script file and replace
x25_fw_2424.mem with the new name you
have created.
If any other file that is to be copied to the hard drive does not meet the MS-DOS file
naming conventions, you must rename it as well.
Step 2: Access the Freeway Interactive Menu
Log on to Freeway as described in Section 4.1.1 on page 118. You must be at the Free-
way Interactive Menu.
Step 3: Modify the Freeway Boot Parameters to Boot from the Boot Server
The
Boot Device, System Boot Directory, and Secondary Network Interface boot parameters
differ depending on whether you are booting from a boot server or from a hard disk.
Section 4.4.2.3 on page 129 describes how to display the boot parameters. Section 4.5.1