User guide

154 DC 900-1333P
Freeway User Guide
4.5.2 Modify User Names
To modify the Freeway user names, enter ‘3’ at the Modify Configuration menu. The
Modify User Names menu is shown in Figure 4–28. You can then select ‘2’ to add a user
name or ‘3’ to delete one. In either case, you are prompted to enter the user name, then
asked to enter the password twice. There can be up to 10 user names. User names can be
up to 80 characters in length and can include spaces. Passwords must be at least 8 char-
acters in length and no more than 40 characters.
When you first install Freeway, the default user name (
simpact) and password (password)
are in effect. Changes made with the Modify User Names menu modify the permanent
User/Password table. This table is checked each time Freeway is rebooted. If all user
names are removed or the table becomes corrupted, the User/Password table will auto-
matically be rebuilt the next time Freeway is rebooted and the default user name and
password will again be in effect.
Caution
The Freeway user name and password are used to access the
Freeway Interactive Menu. They are not to be confused with the
FTP user name and FTP password (which have defaults of
freeway
and password). The latter are Freeway system boot parameters
which are used between Freeway and the boot server during system
boot (see Section 4.5.1 on page 148).
Figure 4–28: Modify User Names
Modify User Names
-----------------
1) Return to Modify Configuration Menu
2) AddUsertoLoginTable
3) Delete User From Login Table
Select: