User guide

4: Operations
DC 900-1333P 153
Gateway Inet Interface If your Freeway and boot server are on the same network, clear this
parameter, which is the default. If they are on different networks, enter
the IP address of the gateway processor on the Freeway’s network that
provides access to the boot server’s network.
Table 4–2: Flags for Reset Action
Flags Parameter Value Reset Action
0x0000 (default)
Upon system reset, wait 7 seconds before autobooting.
0x0004
Upon system reset, display the Freeway Boot System Main Menu. Do
not autoboot.
0x0008
Upon system reset, wait 2 seconds before autobooting.
0x1000
Display version numbers of
.mem files downloaded to an ICP during
boot. The
Flags word is an inclusive “OR” of the desired bits for the
individual functions; for example, 0x1008 waits 2 seconds before auto-
booting and displays the version numbers.
0x2000
Force primary boot network interface to operate at 10 megabits/
second, half duplex. The
Flags word is an inclusive “OR” of the desired
bits for the individual functions; for example, 0x2008 waits 2 seconds
before autobooting and forces the 10 megabits/second speed.
Table 4–1: Freeway System Boot Parameter Descriptions (Cont’d)
Boot Parameter Description