User guide

124 DC 900-1333P

Freeway User Guide

• freeway/boot/bootcfg.pci defines the configuration for a Freeway

1100/1150/1200/1300 with ICP2432s (PCI boards)

• freeway/boot/bootcfg.vme defines the configuration for a Freeway 2000/

4000/8800.

• The server TSI configuration file (freeway/boot/muxcfg

) describes the TSI config-

uration for Freeway. See Section 3.3 on page 111 for details on the

muxcfg file.

Step 4: Configure the System

Freeway configures the system based on the files downloaded in Step 3:

• Freeway uses the information in the boot configuration file to configure the phys-

ical and virtual devices and services, and build the corresponding databases.

Freeway then downloads the

.mem object files from the boot server to the ICPs

based on the download script file defined for each ICP (for example,

freeway/boot/fmpload defines the download script for Freeways that use the FMP

protocol).

• Freeway uses the freeway/boot/muxcfg file to configure the interface between the

server software and the transport subsystem. Figure 3–2 on page 113 shows a

sample

muxcfg file.

1. The example server-resident application uses muxcfg.sra. The Military/Government protocol uses

milmuxcfg.