User guide

4: Operations
DC 900-1333P 119
You can also use rlogin (or telnet) to log in to Freeway from the boot server or any other
computer on the network; for example:
rlogin freeway1 telnet freeway1
Freeway User Login:
simpact Freeway User Login: simpact
Password:
password Password: password
The password is not actually displayed on the screen.
When you first install Freeway, the default user name (
simpact) and password
(
password) are in effect. Use the Modify User Names menu described in Section 4.5.2
on page154 to change the user names and passwords. The User/Password table is per-
manent and is checked each time Freeway is rebooted. If all user names are removed or
the table becomes corrupted, the User/Password table will automatically be rebuilt the
next time Freeway is rebooted and the default user name and password will again be in
effect.
After you log in, the Freeway Interactive Menu is displayed (Section 4.2 on page 120)
and client processes can begin accessing Freeway.
4.1.2 Shutdown Procedures
1. Inform all network users that you will be shutting down Freeway and that they
should terminate any client applications that are accessing Freeway and then log
out.
2. After all users have logged out, select the Logout option from the Freeway Inter-
active Menu.
3. If you need to replace any components, power down the Freeway unit and unplug
the AC power cord.
4. After making your modifications, replace the power cord and power up the
Freeway unit. Startup proceeds automatically as described previously in
Section 4.1.1.