User guide

104 DC 900-1333P

Freeway User Guide

Download Script If the service provider owns a device that is downloadable, Freeway

executes a load program on behalf of the service provider before starting the ser-

vice provider image. The

download_script parameter should define the name of a

download script file that can be used by the download utility. If no path name is

provided, Freeway searches the System Boot Directory specified in the System

Boot Parameters menu (described in Section 4.5.1 on page 153) for the file name

indicated. Use a fully qualified path name to the download script file if the file is

placed in another directory.

Server TSI Configuration File At boot time, Freeway uses the server TSI configura-

tion file to configure the interface between the server software and the transport

subsystem. This file name is specified in the

tsi_config_file parameter. The default

freeway/boot/muxcfg

(Section 3.3.2).

Route Add An optional “route add” parameter can be specified. This field adds a gate-

way to the Freeway server’s routing tables. Freeway does not have a routing dae-

mon, and must be explicitly informed about a gateway. The first parameter

indicates the Internet address of a destination network or machine, and the sec-

ond parameter indicates the Internet address of a gateway to that network or

machine. For example:

route_add 126.0.0.0 207.67.135.10

tells Freeway that the machine with Internet address 207.67.135.10 is the gateway

to network 126.0.0.0. To specify a default gateway, the first parameter should be

set to “0” and the second parameter should indicate the Internet address of the

host to be the default gateway. This parameter may be used multiple times to add

gateways for multiple destinations. The Internet address of the default gateway

must be the same as the address entered for the

Gateway Inet Interface parameter of

the System Boot Parameters menu described in Section 4.5.1 on page 153.

1. The example server-resident application uses muxcfg.sra. The Military/Government protocol uses

milmuxcfg.