User guide

102 DC 900-1333P

Freeway User Guide

The boot configuration file allows comment lines to be entered by placing the pound

sign (#) at the beginning of a line of text. All blank lines are skipped. All fields must be

delimited with white space. White space between each field can be spaces or tabs.

Following is a description of the parameters in the boot configuration file:

Device Name The

device_name parameters in the example file in Figure3–1 are icp0

and icp1. Freeway uses the device names to identify the devices. If a Freeway client

uses the data link interface (DLI), the device name must be of the form “

icpx”,

where

x corresponds to the BoardNo parameter in the DLI configuration file, free-

way/client/test/ppp/pppaldcfg

. Each device name entered in the boot configuration

file must be unique. (Remember that the

ppp variable specifies the particular pro-

tocol or toolkit you are using. Refer to Ta bl e 2 –2 on page31.)

#---------------------------#

# Server wide parameters #

#---------------------------#

tsi_config_file = muxcfg

#route_add = 0 192.192.192.192

#sra_module = sra486.o

#sra_entry = sraInit

vxworks_shell = FALSE

#added_interface_type = elt,2

#added_interface_mask = ffffff00

#added_interface_addr = 207.207.207.207

1. The DLI configuration file for X.25 is freeway/client/test/x25mgr/apidcfg.

Figure 3–1: Freeway 1100/1150/1200/1300 Boot Configuration File (bootcfg.pci) (Cont’d)