Installation guide

4: Conﬁguring the Boot Parameters using the Local Console

DC 900-1537B 55

Step 5:

Select option 3 to edit the boot parameters. The system displays the parameters one at

a time. Three actions are possible as each parameter is displayed:

• To preserve a parameter, press <return>

• To edit a parameter, type the new alpha-numeric information and press <return>

• To clear a parameter, press the period key (‘.’) followed by <return>

Figure 4–2 shows an example of a Freeway System Boot Parameters screen.

Figure 4–2: Example of the Freeway System Boot Parameters

For Freeway,

you always see

password. It’s

only for SR

with a local

console that I

use ### to

indicate that

password isn’t

seen.

Freeway System Boot Parameters

----------------–––-----------

Boot Device : fei

Processor Number : 0

FTP User Name : freeway

FTP Password : password

Flags : 0

Freeway Server Name : freeway1

Freeway Inet Address : 207.67.135.224

Freeway Subnet Mask : ffffff00

Boot Server Name : bootmaster

Boot Server Inet Address : 207.67.135.198

System Boot Directory : /usr/local/freeway/boot

System Boot File Name : fw486

Configuration File Name : bootcfg.pci

Secondary Net Interface :

Gateway Inet Address :