Installation guide

38 DC 900-1537B

Freeway 1200/1300 Hardware Installation Guide

Step 7:

Make sure that the power switch on the front panel is off, then make the LAN connec-

tions. The Freeway’s CPU board has an RJ-45 connector for twisted-pair cable comply-

ing with the 10/100BaseT speciﬁcation.

Caution

Alert your system administrator before making connections to

your LAN. To avoid a disruption of service on your LAN, carefully

plan how you will make the connections. We recommend that you

power off the Freeway server and modem during cable installation

and removal.

Check with your system administrator to ﬁnd out what type of cable is used at your site.

You may need to use a mini-hub to convert from 10BaseT to 10Base2 or 10Base5.

(100BaseT always uses the RJ-45 connector.) You can obtain the necessary equipment

and cables from a computer accessory vendor.

Save: Ethernet

is on CPU

board for a

3200/1300,

but is a

separate board

for the

3100/3150.