Installation guide

2: Hardware Installation

DC 900-1537B 33

Note

You do not have to wear the anti-static strap while connecting

Freeway to the network, but it should be kept with the unit for

future use when you are making upgrades to the system that

require access to the inside of the enclosure.

The carton may also contain other documentation. If anything is missing, contact your

Simpact customer service representative at 1-800-275-3889.

Note

Keep the original box and packing material. To avoid damage

during shipment, use the original box and packing material when

shipping your Freeway.

Step 4:

You must supply the following:

• Ethernet local area network (10BaseT or 100BaseT)

• Computer running TCP/IP and FTP or RSH to be used as a boot server

• VT100-compatible terminal or terminal emulator if you will be using a local

console to conﬁgure the boot parameters and perform the initial system boot

• Cables for connecting Freeway to the LAN and WAN

• Synchronous modem for loopback testing described in the Freeway Loopback Test

Procedures