Installation guide
32 DC 900-1537B
Freeway 1200/1300 Hardware Installation Guide
Be sure the location meets the following environmental standards:
• Operating temperature: 32° – 122° F (0° – 50° C)
• Humidity: 5% – 80% (relative non-condensing)
• Altitude: 0 – 10,000 feet (0 – 3048 meters)
• Good ventilation
• Little or no dust
Step 3:
Check that the shipping carton includes the following:
• Freeway
• Power cord (Freeway 1300 has two power cords)
• Set of keys (for hinged front panel) attached to the Freeway handle
• Console cable (each end of the cable has both a 9-pin and a 25-pin connector)
• Anti-static strap
• Appropriate cables to connect the ICPs to the data communications equipment
• Boot parameter initialization disk
• Two- and three-headed loopback cables, one per Freeway ICP
• Freeway 1200/1300 Hardware Installation Guide (this manual)
• Freeway User Guide
• Freeway Loopback Test Procedures
• Software distribution media with the applicable programmer’s guide and other
supporting documentation
Temp is from
data sheet.
Humidity is
from Eric; he
didn’t like
what data
sheet said.