Installation guide

10 DC 900-1537B
Freeway 1200/1300 Hardware Installation Guide
Chapter 3 describes how to configure the boot parameters using the boot parameter
initialization disk.
Chapter 4 describes how to configure the boot parameters using the local console.
Appendix A shows the commonly used electrical interfaces.
Appendix B describes the Freeway 1300 LED panel and alarm functions.
Appendix C describes how to replace a power supply in the Freeway 1300.
Simpact References
The following general product documentation list is to familiarize you with the avail-
able Simpact Freeway and embedded ICP products. The applicable product-specific
reference documents are mentioned throughout each document (also refer to the
“readme” file shipped with each product). Most documents are available on-line at
Simpact’s web site, www.simpact.com.
General Product Overviews
•
Freeway 1100 Technical Overview
25-000-0419
•
Freeway 2000/4000/8800 Technical Overview
25-000-0374
•
ICP2432 Technical Overview
25-000-0420
• ICP6000X Technical Overview
25-000-0522
Hardware Support
•
Freeway 1100/1150 Hardware Installation Guide
DC-900-1370
•
Freeway 1200/1300 Hardware Installation Guide
DC-900-1537
•
Freeway 2000/4000 Hardware Installation Guide
DC-900-1331
•
Freeway 8800 Hardware Installation Guide
DC-900-1553
•
Freeway ICP6000R/ICP6000X Hardware Description
DC-900-1020
•
ICP6000(X)/ICP9000(X) Hardware Description and Theory of
Operation
DC-900-0408
• ICP2424 Hardware Description and Theory of Operation
DC-900-1328
10/19/99
Leslie: Add
1566
Addendum to
1501, and add
“Freeway” to
title of 1533.