Installation guide

2: Hardware Installation

DC 900-1370E 33

Note

Keep the original box and packing material. To avoid damage

during shipment, use the original box and packing material when

shipping your Freeway.

Step 4:

You must supply the following:

• Ethernet local area network (10BaseT or 100BaseT)

• Computer running TCP/IP and FTP or RSH to be used as a boot server

• VT100-compatible terminal or terminal emulator if you will be using a local

console to conﬁgure the boot parameters and perform the initial system boot

• Cables for connecting Freeway to the LAN and WAN

• Synchronous modem for loopback testing described in the Loopback Test Proce-

dures

Ron says ISA

only uses

10BaseT, PCI

can use either

but item 1 is

okay.