User`s guide

DC 900-1339H 121

Appendix

FMP Loopback Test

Program

Note

In this document, the term “Freeway” can mean either a Freeway

server or an embedded ICP. For the embedded ICP, also refer to

the user’s guide for your ICP and operating system (for example,

the ICP2432 User’s Guide for Windows NT).

D.1 Loopback Test Programs

The FMP loopback test programs and test directories are listed in Table D–1, according

to operating system (UNIX, VMS, or Windows NT). This section provides a summary

of the steps required to run the loopback test; see the Loopback Test Procedures docu-

ment for the details and an example output (this information was previously in the

Freeway User’s Guide). The loopback program uses non-blocking I/O, meaning that the

asyncIO DLI configuration parameter (described in the Freeway Data Link Interface

Reference Guide) must be set to “yes” (the default is “no” for blocking I/O).

Table D–1: Loopback Test Programs and Directories

Operating System Loopback Program Test Directory

UNIX fmpalp.c usr/local/freeway/client/test/fmp

VMS FMPALP.C SYS$SYSDEVICE:[FREEWAY.CLIENT.TEST.FMP]

Windows NT fmpalp.c c:\freeway\client\test\fmp