User`s guide

12 DC 900-1339H
FMP Programmer’s Guide
•
a Freeway communications server or embedded ICP that runs the communica-
tions software
•
a client computer that runs the following:
•
TCP/IP (for a Freeway server)
•
Freeway DLI
•
the user application program
Organization of Document
Chapter 1 is an overview of Freeway and the FMP product.
Chapter 2 summarizes the basic communication protocol formats available on the FMP
software package.
Chapter 3 describes how to use the data link interface (DLI) between the client applica-
tion program and the FMP communications software running on the Freeway ICP.
Chapter 4 describes the link configuration options available on the FMP software pack-
age.
Chapter 5 describes how to configure the FMP link options using the
dlicfg
program.
Appendix A describes the line control procedures for FMP.
Appendix B contains the ASCII/EBCDIC and ASCII/Baudot code translation tables.
Appendix C describes error handling and lists the error codes.
Appendix D describes the FMP loopback test program.
Simpact References
The following documents provide useful supporting information, depending on the
customer’s particular hardware and software environments. Most documents are
available on-line at Simpact’s web site, www.simpact.com.
4/5/99 Leslie:
Add DC-900-
1512, Solaris
STREAMS
Techpubs:
Don’t delete
the “Other
Helpful
Documents”
(separate
table at end of
References).
Also set “space
below” on first
table = 0 pt.