User`s guide

104 DC 900-1339H
FMP Programmer’s Guide
a
The msgBlkSize parameter allows the DLI to configure the ICP message buffer size (equivalent to the Set ICP Mes-
sage Buffer Size command in Section 3.4.1.3 on page 48).
b
If you use dlWrite without optional arguments, one of the EOM types is used, depending on the writeType DLI
configuration parameter. If
writeType is set to “normal,” DLI_PROT_SEND_NORM_DATA_EOM is used; if it is set to “trans-
parent,” DLI_PROT_SEND_TRANS_DATA_EOM is used.
Table 5–1: FMP ICP Link Parameters and Defaults for Using dlicfg
dlicfg Option
Name Default Valid Values
dataRate 9600 75, 110, 135, 150, 300, 600, 1200, 2400, 4800, 9600,
19200, 38400 or 56000
clockSource “external” “external” or “internal”
numLeadSync 3 2–8
protocol “FMP” “FMP”
parity “odd” “none”, “odd”, or “even”
charSet “asciilrc8” “asciilrc8”, “ebcdiccrc16”, “asciicrc16”,
“asciilrc8bit6”, “ebcdicccitt0” or “asciiccitt0”
transBlkSize 512 64–4096
dataTranslation “table1” “disable”, “table1”, “table2” or “table3”
dataPacking “yes” “yes” or “no”
bufferTimer 0 0–8000
modemControl “FDX1” “HDX1”, “FDX1”, “HDX2”, “FDX2”, “HDX3”, “FDX3, “HDX4” or
“FDX4”
feedID 0 0–999
messageBlocking “DataHdr” “RawBlk”, “DataBlk”, “SingleRec”, “DataHdr” or “RawHdr”
blockChecking “exclFirst” “disable”, “exclFirst” or “inclFirst”
qLimit 0 0–4096
etbEnable “no” “yes” or “no”
dsrDelay 3 1–127
lineMode “bsc” “bsc”, “structAsync”, “unstructAsync8”, “unstructAsync7”,
“unstructAsync6”, “unstructAsync5”, “iso8” or “bonneville”
asyncTermChar 3 0–255
numTermChar 1 0 or 1
usrDataRate 0 0–4096
elecInterface “EIA232” “EIA232”, “EIA485”, “EIA530”, “V35”, “unbEIA449” or “EIA562”
msgBlkSize
a
1024 256–8192
writeType
b
“normal” “normal” or “transparent”