User`s guide

46 DC 900-1349B
BSCDEMO User’s Guide
INPUT BUFFER (HEX 16):
HEADER: 0 17 0 0 0 2 0 0 0 0 0 0 0 0 0 16
v-START OF DATA 0 14 0 0 0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
bscdemo> i/c ! Enable control node (must use node 17)
Node number? (8 to 64): 17
CONTROL NODE ENABLED
! Show how control node can be used for any legal type of extra clients
CONTROL> attach 2 ! Attach a second Link 2 shared master client
Mode = (-1 to 64): 1
2780/3780 = 0, 3270 = 1, FMP = 2, SWIFT = 3, CHIPS = 4
Protocol Type (0 to 4): 2
Received ATTACH COMPLETE (46) from link 2
CONTROL> attach 3 ! Attach a link 3 control mode client
Mode = (-1 to 64): 2
2780/3780 = 0, 3270 = 1, FMP = 2, SWIFT = 3, CHIPS = 4
Protocol Type (0 to 4): 2
Received ATTACH COMPLETE (46) from link 3
CONTROL> w/t/l 3 ! Example: control session cannot send data
Input number of test blocks to send: (1 to 32767): 1
Received NORMAL DATA-ETX (17) from link 3
with ERROR 49 -- Incorrect Mode
Unit: 0 Device: 0 Size: 0
*> END OF MESSAGE.
CONTROL> detach 2,3 ! Detaching causes errors because the sessions
! are already closed when the dlRead occurs.