User`s guide

B: BSC 2780/3780 Example
DC 900-1349B 35
17 SAFE STORE = 0(OFF) 19 MESSAGE BLOCKING = 1(DATA)
20 BLOCK CHECKING = 1(EXCLUDE) 21 READ QUEUE LIMIT = 0
22 EOM LINE CONTROL = 0(REVERSE) 23 DATA ACK NODE = 0(OFF)
24 ALTERNATING ACK = 1(ON) 26 TTD/WACK = 1(ON)
28 RVI HANDLING = 0(CONTINUE) 30 DSR DELAY = 3
31 TTD/WACK LIMIT = 0 32 DISCONNECT TIMER = 0
35 MODEM TYPE = 1(SADL) 41 LINE TYPE = 0(LEASED)
bscdemo> l5 ! Request link configuration report
Received CONFIG REPORT (14) from link 5
1 DATA RATE = 9(9600) 2 CLOCK SOURCE = 0(EXTERNAL)
3 REPLY TIMEOUT = 3 4 NUMBER SYNCS = 3
5 PROTOCOL = 0(3780) 6 PARITY = 1(ODD)
7 CHARACTER SET = 0(ASCII) 8 TRANSMIT BLOCK SIZE= 512
10 DATA TRANSLATION = 1(TABLE 1) 11 STATION STATUS = 0(SLAVE)
12 SPACE COMPRESSION = 0(OFF) 13 CONVERSATION MODE = 0(OFF)
14 RETRY LIMIT = 3 16 MODEM CONTROL = 1(FDX)
17 SAFE STORE = 0(OFF) 19 MESSAGE BLOCKING = 1(DATA)
20 BLOCK CHECKING = 1(EXCLUDE) 21 READ QUEUE LIMIT = 0
22 EOM LINE CONTROL = 0(REVERSE) 23 DATA ACK NODE = 0(OFF)
24 ALTERNATING ACK = 1(ON) 26 TTD/WACK = 1(ON)
28 RVI HANDLING = 0(CONTINUE) 30 DSR DELAY = 3
31 TTD/WACK LIMIT = 0 32 DISCONNECT TIMER = 0
35 MODEM TYPE = 1(SADL) 41 LINE TYPE = 0(LEASED)
bscdemo> l/s 4,5 ! Request link status report
Received STATUS REPORT (13) from link 4
Link is ON Mode is IDLE
DTR is ON DCD is ON
RTS is ON CTS is ON
RCV is OFF XMT is OFF